Andrew CNT-400 low loss .405 Diameter cable 10 foot+

Andrew CNT-400 low loss .405 Diameter cable 10 foot+
Click To Enlarge
  • Item #: CNT400_PATCH
  • Manufacturer: Andrew / Commscope
  * Marked fields are required.
Qty*
Price $9.99

This is the cable you need for longer runs it will perform great on VHF and UHF even for 100+ foot runs!  You can add length to the order up to 150' total if you require a special size piece or more than a 150' cable contact us for a quote.

 

Note: Shipping cost is added into price as you add cable.

 

Construction Materials  
Jacket Color   Black
Jacket Material   Non-halogenated PE
Braid Material   Tinned copper
Shield Tape Material   Aluminum
Dielectric Material   Foam PE
Inner Conductor Material   Copper-clad aluminum wire
   
Dimensions  
Cable Weight   0.10 kg/m
Diameter Over Dielectric   7.240 mm   |   0.285 in
Diameter Over Jacket   10.290 mm   |   0.405 in
Diameter Over Tape   7.391 mm   |   0.291 in
Inner Conductor OD   2.7400 mm   |   0.1079 in
Nominal Size   0.400 in
Outer Conductor OD   8.080 mm   |   0.318 in
   
Electrical Specifications  
Cable Impedance   50 ohm
Capacitance   78.0 pF/m   |   24.0 pF/ft
dc Resistance, Inner Conductor   4.690 ohms/km   |   1.430 ohms/kft
dc Resistance, Outer Conductor   5.610 ohms/km   |   1.710 ohms/kft
dc Test Voltage   2500 V
Jacket Spark Test Voltage (rms)   4000 V
Maximum Frequency   16.20 GHz
Operating Frequency Band   30 – 6000 MHz
Peak Power   16.0 kW
Shielding Effectiveness   >90 dB
Velocity   85%
   
Environmental Specifications  
Installation Temperature   -40 °C to +85 °C (-40 °F to +185 °F)
Operating Temperature   -40 °C to +85 °C (-40 °F to +185 °F)
Storage Temperature   -70 °C to +85 °C (-94 °F to +185 °F)
   
General Specifications  
Cable Type   CNT-400
Braid Coverage   90% braid
Brand   CNT®
   
Mechanical Specifications  
Bending Moment   0.7 N-m   |   0.5 ft lb
Flat Plate Crush Strength   0.7 kg/mm   |   40.0 lb/in
Minimum Bend Radius, Single Bend   25.40 mm   |   1.00 in
Tensile Strength   73 kg   |   160 lb
Electrical Performance
Frequency Attenuation (dB/100 m) Attenuation (dB/100 ft)
30 MHz 2.49 0.76
50 MHz 3.18 0.97
150 MHz 4.92 1.50
220 MHz 6.23 1.90
450 MHz 8.86 2.70
900 MHz 12.80 3.90
1500 MHz 16.70 5.10
1800 MHz 18.40 5.60
2000 MHz 19.40 5.90
2400 MHz 21.65 6.60
2500 MHz 22.00 6.70
3000 MHz 24.60 7.50
4000 MHz 28.87 8.80
4500 MHz 30.84 9.40
5000 MHz 32.81 10.00
5200 MHz 33.46 10.20
5500 MHz 34.78 10.60
5800 MHz 35.76 10.90
6000 MHz 36.42 11.10